CHBNP - 310H LIME

  • MSDS: CHBNP
  • Manufacturer: ESAB GROUP INC
  • Product Name: 310H LIME
  • National Stock Number: 3439-00N085384
Product Identification

Product ID:310H LIME
MSDS Date:01/31/1997
FSC:3439
NIIN:00N085384
MSDS Number: CHBNP

Responsible Party
ESAB GROUP INC
801 WILSON AVE
HANOVER, PA 17331
US

Emergency Phone: 717-637-8911

Info Phone: 717-637-8911

Cage: HO829

Contractor
ESAB GROUP INC
517 HANOVER, PA 17331 US

Telephone: 717-637-8911

Cage: HO829

Ingredients

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 2%

OSHA PEL C 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST


NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 15-18%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3


CHROMIUM (SARA 313) (CERCLA)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 20-23%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


CALCIUM FLUORIDE (AS F); (CAF2)

CAS: 7789-75-5

RTECS: EW1760000

OSHA PEL 2.5 MG/M3 (MFR)

ACGIH TLV: 2.5 MG/M3 (MFR)


CALCIUM CARBONATE; (CACO3)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


SILICA, CRYSTALLINE - QUARTZ; (SIO2)

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST


SILICON; (SI)

CAS: 7440-21-3

RTECS: VW0400000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


SILICIC ACID (H2SIO3), DISODIUM SALT

CAS: 6834-92-0

RTECS: VV9275000

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)


SILICATE BINDERS

CAS: 10006-28-7

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)


IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 10 MG/M3 (MFR)

ACGIH TLV: 5 MG/M3 (MFR)


VOLAT, RXN/OXIDATION OF INGS, PLUS THOSE

RTECS: 9999999ZZ


REASONABLY EXPECTED DECOMP PRODS FROM NORM USE OF

RTECS: 9999999ZZ


MATLS LISTED IN INGS SECTION, AS WELL AS CARBON

RTECS: 9999999ZZ


WAY TO DETERMINE TRUE IDENTITY OF DECOMP PRODS IS

RTECS: 9999999ZZ


IARC

RTECS: 9999999ZZ


ANTICIPATED TO BE CARCINOGEN.

RTECS: 9999999ZZ


CHEST PAIN. CHROMIUM/CHROMATE IN FUME CAN

RTECS: 9999999ZZ


FUME CAN CAUSE METALLIC TASTE, NAUS, TIGHTNESS OF

RTECS: 9999999ZZ


CONTAMINANTS MAY LEAD TO THEIR ACCUM IN LUNGS, A

RTECS: 9999999ZZ


SEV OF CHANGES IS PROPORTIONAL TO LENGTH OF EXPOS.

RTECS: 9999999ZZ


REDUCED LUNG FUNC/DISEASE. IN ADDN, CHANGES ON

RTECS: 9999999ZZ


ETC. NICKEL & CHROMIUM ARE CONSIDERED CARCIN. LONG

RTECS: 9999999ZZ


FIBROSIS & EDEMA. OVEREXP TO MANGANESE CMPDS MAY

RTECS: 9999999ZZ


MUSCULAR WEAKNESS, EMOTIONAL DISTURBANCES AND

RTECS: 9999999ZZ


FLUSH WITH

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ELEC ARC WORKING MAY CREATE ONE/MORE
OF THE FOLLOWING HLTH/PHYSICAL HAZS. FUMES & GASES CAN BE DANGEROUS
TO YOUR HLTH. ELEC SHOCK CAN KILL. ARC RAYS CAN INJURE EYES & BURN
SKIN. NOISE CAN DMG HEARING. WHEN THESE PRODS ARE USED AS REC BY
MFR, & VENT MAINTAINS EXPOS TO DECOMP PRODS BELOW LIMITS REC, (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NICKEL: IARC MONO, VOL 49, PG 257, 1990:
GROUP 2B. NTP 7TH ANNUAL RPT ON CARCINS, 1994: ANTIC TO BE CARCIN.
(ING 15)
Effects of Overexposure:HLTH HAZ: OVEREXP IS UNLIKELY. ACUTE OVEREXP TO
GASES, FUMES & DUSTS MAY INCL IRRIT OF EYES, LUNGS, NOSE & THROAT.
SOME TOX GASES ASSOC W/WELDING MAY CAUSE PULM EDEMA, ASPHY & DEATH.
ACUTE OVEREXP MAY INCL SIGNS & SYMPS SUCH AS WATERY EYES, NOSE &
THROAT IRRIT, HDCH, DIZZ, DFCLTY IN BRTHG, FREQUENT COUGHING,
OR(ING 17)
Medical Cond Aggravated by Exposure:PERS W/ALLERGIES/IMPAIRED RESP
FUNCTION MAY HAVE SYMPS WORSENED BY EXPOS TO WELDING FUMES.
HOWEVER, SUCH REACTION CANNOT BE PREDICTED DUE TO VARIATION IN
COMPOSITION & QUANTITY OF DECOMPOSITION PRODS.

First Aid

First Aid:IN CASE OF EMER, CALL FOR MED AID. EMPLOY FIRST AID
TECHNIQUES REC BY RED CROSS. INHAL: IF BRTHG IS DFCLT, GIVE OXYGEN
& CALL FOR MD. ELEC SHOCK: DISCONNECT & TURN OFF POWER. IF NOT
BRTHG, BEGIN ARTF RESP, PREF MOUTH-TO-MOUTH. IF NO DETECTABLE
PULSE, BEGIN CPR. IMMED CALL MD. ARC BURN: APPLY COLD, CLEAN
COMPRESSES & CALL MD. EYES: FLUSH W/POTABLE WATER FOR AT LEAST 15
MIN. SEE MD . (ING 25)

Fire Fighting

Extinguishing Media:PROD WILL NOT BURN. HOWEVER, WELDING ARCS & SPKS
CAN IGNITE COMBUST & FLAM MATLS. USE EXTING MEDIA REC FOR (SUP DAT)
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:AS SHIPPED, THESE PRODUCTS ARE
NON-FLAMMABLE, NON-EXPLOSIVE, NON-REACTIVE, AND NON-HAZARDOUS. ONLY
THE PACKAGING FOR THIS PRODUCT WILL BURN.

Accidental Release

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:TRAIN THE WELDER NOT TO TOUCH LIVE
ELECTRICAL PARTS, TO INSULATE HIMSELF FROM WORK AND GROUND, AND TO
KEEP HIS HEAD OUT OF FUMES.
Other Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS & PREC LABEL ON
PROD. SEE AMERICAN NATL STD Z-49.1, "SFTY IN WELDING & CUTTING",
PUBLISHED BY AMERICAN WELDING SOCIETY, & OSHA PUBLICATION 2206
(29CFR 1910). CONT NEHC FOR MORE SPECIFIC INFO .

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOCAL EXHAUST AT ARC/BOTH, TO KEEP FUMES &
GASES BELOW TLV IN WORKER'S BREATHING ZONE & GEN ARC AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYEWASH AND DELUGE
SHOWER . ARM PROTECTORS, APRONS, HATS, DARK CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA: BURNING MATLS & FIRE SITUATION. SEE ANSI Z49.1 "SFTY IN
WELDING & CUTTING" & "SAFE PRACT" CODE: SP, PUBLISHED BY AMERICAN
WELDING SOCIETY, P.O. BOX 351040, MIAMI, FL 33135, & NFPA 51B "C
UTTING & WELDING PROCESSES", PUBLISHED BY NATL FIRE PROT ASSOC,
BATTERYMARCH PARK, QUINCY, MA 02269 FOR ADDNL INFO.

Chemical Properties

HCC:T6
Appearance and Odor:SOLID STAINLESS STEEL CORE WIRE WITH FLUX COATING,
ODORLESS

Stability

Stability Indicator/Materials to Avoid:YES
NONE CURRENTLY KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. DECOMP PRODS OF NORM OPERATION INCL THOSE
ORIGINATING FROM (ING 11)

Disposal

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER, OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE A ND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.